CAD-COLOR® SuperTEK® Gloss Clear Printable HTV

CAD-COLOR® SuperTEK® Gloss Clear Printable HTV

  • Sale
  • $267.00
Shipping calculated at checkout.
Item may ship from CA or MI

 

Material Overview


With exceptional stretch and rebound properties, this lightweight printable heat transfer vinyl applies at a low temperature so you can decorate difficult fabrics like Lycra®/spandex and nylon without scorching. Cut and apply without printing to achieve a "liquid glass" look.
  • Lightweight, stretchable, incredibly soft hand
  • Gloss finish
  • Low application temperature - safe for sensitive materials
  • Apply over a material for tone-on-tone "liquid glass" look
  • For white or light fabrics only
  • Mask is not needed
  • For solvent inks using a print/cut system only—not compatible with inkjet/laser printers
  • Compatible with our Stahls' Rip-Away Appliqué™ Process
Tip: Protect heat-sensitive garments from imprints and scorching with a Silicone Upper Platen Cover.

 Material Specifications


  • Composition: Polyurethane (PU)
  • Carrier: Frosted, Non-Pressure Sensitive
  • Thickness: 37 microns (.037 mm)
  • Stretch & Rebound: 5
  • Washability: 50
  • Color Fastness: 4-5
  • Dry Time: 30-60 minutes
  • Safety: CPSIA Certified

Application Instructions

Time: Tack for 5 seconds, peel cold, cover and seal 5 seconds.
Temperature: 280-300°F/ 138-150°C
Pressure: Medium (#6 on Hotronix)

Heated Lower Platen Application

Upper:     250°F
Lower:     320°F
Time:      12-15 seconds (depending on thickness of garment)
Pressure: Medium

Print/Cut Instructions

  1. Print and cut your design in mirrored form on the adhesive side of the roll
  2. Once dry, weed away excess material
  3. Position the weeded design in positive form on the garment for heat application

Material/Fabric Compatibility

  • 100% Cotton
  • 100% Polyester
  • 100% Preshrunk Cotton
  • Cotton/Poly Blends
  • Lycra®/Spandex Blends
  • Nylon

Care Instructions

Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

Storage

Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Cutter Guidelines

Cutter                      Blade              Force                     Offset                    Speed
Roland GX-24            45°               70-90g                     .25                       30cm/s

Roland VP-300          45°                70-90g                    .25                        30cm/s

Roland SP-300          45°                70-90g                     .25                       30cm/s

Roland XC-540          45°                70-90g                    .25                        30cm/s