StarCraft Foils

12 inch x 25 foot rolls of StarCraft Electra Foil for Heat transfer. Electra Foil does NOT have adhesive so you must use a separate heat transfer adhesive such Siser EasyWeed Adhesive or Specialty Materials HotMelt adhesive.

StarCraft Electra Foils

StarCraft Electra Foils is a safe PVC/phthalate/formaldehyde free water based foil adhesive. Create your own dazzling designs by using heat transfer adhesive along with our Electra Foil products. Electra Foil is available in many solid colors and patterns, making your design options only limited by your imagination.

As always, please follow the manufacturers instructions for best results. Testing is recommended on new textiles or substrates.

  • Heat Application:
    • Time: 8-15 seconds
    • Temperature: 280-320° F / 137-160° C
    • Pressure: Medium-Firm
    • Peel: COLD
  • Care Instructions: Do not dry clean; Machine wash COLD / mild detergent; Air Dry; No chlorine bleach; Wait 24 hours before first wash; Wash inside out
  • Recommended Accessories: Siser EasyWeed Adhesive; Multipurpose Paper or Heat Transfer Cover Sheet

Siser Heat transfer adhesive can be found HERE

For Use On: 100% cotton | Poly/cotton blends | 100% polyester


Application Instructions (Home Iron):
Set iron dial between Cotton and Linen
Cover design with Kraft paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure for 10-15 seconds
If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds. Peel carrier hot
Application Instructions (Heat Press):
Cut in reverse and weed excess material
Preheat garment for 2-3 seconds
Apply design at 275°F / 135°C
Use medium pressure for 5-10 seconds
Peel carrier hot
Apply top layer
Laundering:
Wait 24 hours before first wash
Machine wash warm or cold with
mild detergent
Do not bleach or dry clean
Dry on normal dryer setting