• Sale
  • Regular price $8.99
Shipping calculated at checkout.

Easy Puff Metallic Heat Transfer Vinyl

Puff and shine that looks divine!

Featuring the same fun puffy effect as our standard Easy Puff, Easy Puff Metallic adds a new twist: a brilliant shiny finish! After heat applying, simply peel the carrier hot and heat press a second time to activate the puff. Designs will not only expand into 3D, but they'll also give off a beautiful gold or silver sheen! Perfect for big and bold artwork, Easy Puff Metallic has a unique look unlike anything you've seen before!

Easy™ Puff is CPSIA Certified so it's perfect for decorating children's clothing and accessories.


• Easy Puff Metallic differs from our standard Easy Puff line and REQUIRES a 2-press application process. After the first press, the carrier must be peeled hot and the design should be covered with a cover sheet, then pressed a second time to activate the puff effect.

• Because achieving proper, firm pressure is key with Easy Puff, it is not recommended to apply this material with a home iron.

• Texture of applied material can vary from lightly textured to heavily textured.
Siser Romeo & Juliet:
Blade: 45°/60°
Gram Force: 10-20
Offset: .250
Speed: 10
Cricut Maker:
Blade: AutoBlade, Fine-Point
Setting: Heat Transfer (Non-Circut)
Brother Scan N Cut DX:
Blade: AutoBlade
 Cut Speed: 5
Half Cut: Auto
Silhouette Cameo 4:
Blade: AutoBlade, 3
Material: Heat Transfer, Smooth
Force: 6
Speed: 8
Roland GS/GX-24:
Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 30-50 cm/s
Blade: 45°
Gram Force: 8-9
Tool: CB09U+0
Speed: 30 cm/s
US Cutter Titan 2 & 3:
Blade: 45°/60°
Gram Force: 80-85
Speed: 300 mm/s
*Blade Advancing Varies
Mimaki CG-60SR III
Blade: 45°
Gram Force: 80
Offset: 30
Speed: 20-30 cm/s
Settings may vary based on blade condition and age of machine.
Always perform a test cut prior to cutting designs.
Application Instructions (home iron)
• It is not recommended to apply this material with a home iron.

Application Instructions (heat press)
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 280°F/138°C
• Use medium pressure for 10 seconds
• Peel carrier hot
• Use medium pressure for 10 additional seconds
• If areas of design lift after application, replace cover sheet and re-press for 5~10 seconds

Easy Puff Metallic Applies to:
100% cotton
Poly/cotton blends
100% polyester
Recommended Accessories:
Siser Weeder
Wait 24 hours before 1st wash
Machine wash cold / mild detergent
Dry on normal dryer setting
Do not dry clean