**Will Call/ Pick up customers. This item is stocked in Lake Elsinore. If picking up in Corona please allow for next day delivery to our Corona Office.
UltraWeed™ is the go-to material you need for everyday heat printing projects. With smooth cutting on any vinyl cutter, effortless weeding, and low temp application, it’s guaranteed to give you the ultimate, worry-free application from start to finish.
Material Specifications
- Composition: Polyurethane (PU)
- Carrier: High-Tack, Clear
- Thickness: 90-100 microns (.09-.1mm)
- Washability: 50
- Safety: CPSIA Certified
- Laser cutter compatible
1-Color Application Instructions
Time:12 seconds
Temperature:260-300°F
Pressure: Medium
Peel: Hot
2-Color Application Instructions
Time: Press background layer for 2-3 seconds, place foreground layer for full application of 12 seconds
Temperature:260-300°F
Pressure: Medium
Peel: Hot
Hotronix® 360 IQ™ Hat Press
Time:45 seconds
Upper:280°F
Lower:320°F
Pressure:Medium
Peel:Warm/Cold
Cover Sheet:1/8" Foam Pad
Special Notes
If the garment is 50% or more cotton it will require 280°F + degrees.
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Material/Fabric Compatibility
- 100% Cotton
- 100% Polyester
- Cotton/Poly Blends
- Lycra®/Spandex Blends
Find useful comparisons and cutting information in the following documents:
Stahls HTV Compatibility by Fabric Type Chart
Craft Cutter Setting Recommendations
Cutter Instructions, Roland, Graphtec, etc
In some cases this item may ship direct from manufacturer.
Please allow for +/- .50 in length or width to allow for manufacturing anomalies.