You will find 1/8" (3MM) and 1/4" ( 6MM) MDF blank sheets here. Please use the pull down to choose your preference.
19" x11.8" MDF. Works perfect with Glowforge, Mira, K40, Thunder laser, BOSS, and other laser and routing systems
Quantity per box depends on thickness chosen
Boards are cut 19" by 11.8" by hand. While we do our best to make all measurements exact, you may find slight variations we ask for +/- .1875 of an inch for these variations.
These boards fit perfectly within a Glowforge and cut, score, and engrave beautifully.
WE USE THE FOLLOWING SETTINGS ON OUR GLOWFORGE PRO:
1/8" Draftboard- 150 and Full
1/4" Medium Draftboard 128 and Full
NOTE: These settings are a good starting point for your Glowforge machine. We have found that from machine to machine these can vary and need to be adjusted to your specific machine/conditions. Please run a test on any new material you get to ensure a perfect cut on your projects.
We have been using this wood for our kit projects and have been very satisfied with the results.
This wood can be used for many different projects including but not limited to:
If placed with a vinyl order your wood may ship separately.