3D Puff Vinyl is a great way to add some dimension to your project. It is thin while cutting and then it Puffs upon using your heat press.
Please note that the Black turns to a gray when it puffs.
Also note that ALL heat presses will react differently with this product. Please choose to do a test the first time using it so that you can achieve the desired effect.
| SPECIFICATION | |
| Thickness |
130 Micron (before), 500 Micron (after) |
| Temperature |
320°F~329°F (160°C~165°C) Please make sure to test the temperature first due to the heat sensitivity of material. |
| Pressure |
Medium |
| Time |
8~10 Seconds |
| Cutting Setting | 45 degree cut |
| Apply to | Cotton, Uncoated Polyester, Cotton-Polyester Blends excluding Nylon |
| DESCRIPTION |
|
- Puff Heat Transfer Vinyl: Cuttable vinyl with protective carrier and hot melt backing - Soft and Fluffy Puff effect is activated upon heat press and removal or protective film - Available in 20" width roll with what and black color options - Be aware of the result that 2mm or smaller space will disappear when puff is activated. |
| APPLICATION |
| - Plotter cut the wanted design on hot melt layer - Weed the unwanted material - Place it on the fabric - Press at medium pressure - Remove the protective carrier at Hot Peel |
|
Our information is intended for general guidance and we recommend actual tests be done before main jobs to find suitable setting for you. |