CAD-COLOR® 20" Glitter White

CAD-COLOR® 20" Glitter White

  • Sale
  • $313.70
Shipping calculated at checkout.
Item may ship from CA or MI

 Material Overview

This eco-solvent printable Glitter is ideal for decorating fashion, cheer, and fan wear.  The glitter/shimmer finish provides a unique look that sells.
  • Recommended mask: Magic Mask® High Tack
  • Can be cut immediately
  • For solvent inks using a print/cut system only—not compatible with inkjet/laser printers
  • Available in CAD-CUT® Patterns
  • Compatible with our Stahls' Rip-Away Appliqué™ Process

 Material Specifications


  • Thickness: 392 microns (.392 mm)
  • Washability: 50
  • Recommended drying time: 30 minutes before masking
  • Safety: CPSIA Certified

  Application Instructions

Time: 12 seconds
Temperature: 302°F/150°C
Pressure: Medium
Peel: Hot

  Hotronix® 360 IQ™ Hat Press

Time: 45 seconds
Upper: 280°F
Lower: 320°F
Pressure: Medium
Peel: Warm/Cold
Cover Sheet: 1/8" Foam Pad

   Print/Cut Instructions

  1. Print and cut your design in positive form on the media side of the material
  2. Once dry, weed away excess material
  3. Mask the weeded design, smoothing out any air bubbles
  4. Lift the mask to expose the vinyl adhesive from the backing
  5. Position the masked design on the garment for heat application

  Material/Fabric Compatibility

  • 100% Cotton
  • 100% Polyester
  • Cotton/Poly Blends

  Care Instructions

Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.

  Storage

Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.

Cutter Guidelines

Cutter                    Blade              Force                Offset                      Speed
Roland VS-300i       45°             140-160g               .25                        20cm/s

Note: Always test cut prior to any production run. For optimal cutting and weeding, maintain a line thickness of at least 1/16" for lettering & logos.