With superior stretch and rebound, Premium Plus™ was designed to keep up with the most strenuous movements while retaining its original shape. This low-temp material is the ideal choice when decorating heat-sensitive performance wear, and once heat applied has an extremely soft and lightweight feel.
- Thin, soft & durable
- Silky matte finish
- High tack for detailed designs
Material Specifications
- Composition: Polyurethane (PU)
- Carrier: Frosted, Pressure-Sensitive
- High Tack Thickness: 92 microns/.092mm
- Stretch & Rebound: 5
- Washability: 50
- Safety: High Tack CPSIA Certified
- Laser cutter compatible
Application Instructions
Time: 8-12 Seconds
Temp: 280-300°F/138-149°C
Pressure: Medium
Peel: Hot
Two-Color:
5 seconds, peel hot, next layer 5 seconds, peel hot, cover again, heat apply for 5 seconds
Hotronix® 360 IQ™ Hat Press
Time: 10 seconds
Upper: 270°F
Lower: 320°F
Pressure: 60 psi (#6/Medium on Hotronix)
Peel:
Warm for Low Tack; Hot for High Tack
Special Notes
Stahls’ recommends setting your heat press at 280° when heat printing on sensitive fabrics, such as polyester.
Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.
Power Platen not recommended for use with 100% cotton fabrics. For blends with high cotton content proceed with caution. Test application using upper heat only, if it scorches test using lower heat. Decrease pressure for smaller Power Platen sizes.
Care Instructions
Machine wash inside-out using mild detergent.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Do not use bleach. Dry at a normal dryer setting on household machines. Do not dry clean.
Storage
Store in a cool and dry area around 65 to 70 degrees Fahrenheit with 50% relative humidity. Keep away from direct heat, sunlight and humidity. Recommended shelf life is one year.
Material/Fabric Compatibility
- 100% Cotton
- 100% Polyester
- 100% Preshrunk Cotton
- Cotton/Poly Blends
- Lycra®/Spandex Blends
Find useful comparisons and cutting information in the following documents:
Stahls HTV Compatibility by Fabric Type Chart
Craft Cutter Setting Recommendations
Cutter Instructions, Roland, Graphtec, etc
In some cases this item may ship direct from manufacturer.
Please allow for +/- .50 in length or width to allow for manufacturing anomalies.